SSP-G Spark Plug Cap With 120 Degree Elbow
SSP-G Spark Plug Cap With 120 Degree Elbow
$18.23
10 in stock
*Note: Free shipping to U.S. mainland (excludes AK, HI, and territories)
Orders placed by 1pm EST on weekdays ship the same day.
Product Details
Description
OKO Spark Plug Cap 120° Elbow No Resistor | Universal
Key Details
- 145-50
Replacement Part Details
Use this part when the original component is worn, damaged, missing, or no longer working correctly. Many scooter parts can look similar but use different sizes, plugs, brackets, thread patterns, or mounting styles, so careful comparison before purchase is recommended.
Compatibility / Fitment
Use the fitment details below to confirm this part matches your scooter before ordering.
- Fitment Notes: Universal Fit
Fitment Guide: This compatibility information is based on manufacturer and supplier data. Listed models are common known applications and may not include every compatible scooter. If your scooter has multiple versions or production changes, confirm the correct match before ordering. Check photos, measurements, original part numbers, engine code, model, and related fitment information whenever possible.
Additional information
| Weight | 0.3 lbs |
|---|---|
| Dimensions | 4 × 4 × 2 in |
| Condition | New |
|---|
Replace a worn or cracked spark plug cap with this OKO Universal 120° Elbow Spark Plug Cap. The 120-degree elbow routes cleanly in tight engine bays where a straight cap won't fit, and the non-resistor design delivers maximum spark energy directly to the plug. Screws onto any standard 7mm HT spark plug wire — no tools required.
Key Features
- Non-resistor design — zero suppression; hotter, more consistent spark for better throttle response and cold starts
- 120° elbow angle — clears frame rails and bodywork on compact GY6 and Minarelli platforms
- Terminal stud connection — fits spark plugs with removable nut-type terminal stud
- High-temp hard resin — high-dielectric polymer prevents arcing to engine case even in wet conditions
- Angle: 120°
- Resistor: None (non-suppressed)
- Plug Connection: Terminal stud type
- Wire Compatibility: 7mm HT spark plug wire
- Material: High-temp hard resin
- SKU: 145-50
| Engine Family | Compatible Models |
|---|---|
| GY6 4-stroke | QMB139 50cc, QMI152 125cc, QMJ157 150cc |
| Minarelli 2-stroke | 1PE40QMB 50cc, Jog, Zuma, Venus |
| Vintage Vespa | P-series, Stella, VBC, VLB (standard HT leads) |
| Universal | Any engine with a 7mm HT spark plug wire and terminal stud plug |
Installation Tip: Screw the cap onto your existing 7mm spark plug wire until it bottoms out for a weather-tight seal. No tools required.
