Description
SSP-G Replacement Cases for oil cooled 180cc big bore kit. Can accept any B-case cylinder with up a 69mm skirt (base.) This set includes left and right cases, right case cover, case gaskets, bushings, oil seals, and bearings. The crankcase is pre-drilled and tapped for an oil cooler assembly. Please note: Seals, bushings, and bearings are not pre-installed in the cases. Please see our Warranty & Returns Policy.
57mm “B-case” cylinder stud spacing
Case Bore (without gasket installed): 69.3mm
Drilled for oil cooler fittings
Overall left crankcase length: 20 inches
Bushings, bearings, and seals are not installed in cases
Made in Taiwan
SUPPORTED MODELS: GY6 QMI/QMJ 152/157